Administrator's Guide

*Default setting
**May cause Intel AMT partial unprovision
1
Intel ME Platform State Control is only changed for Management Engine (ME) troubleshooting.
2
In Enterprise mode, DHCP automatically loads the domain name.
3
Un-provision setting only seen if the box is provisioned.
Back to Contents Page

Username&Password
Disabled
Enabled *
SerialOverLAN
Disabled
Enabled *
IDERedirection
Disabled
Enabled *
Secure Firmware Update
Disabled
Enabled *
Set PRTC
blank
Idle Timeout
TimeoutValue(0x0-0xFFFF)
1