Administrator's Guide


4. Select Host Name.Press<Enter>.
5. Then type in a unique name for this Intel AMT machine. Press <Enter>.
Spaces are not accepted in the host name. Make sure there is not a duplicate host name on the network. Host names can be used in place of the
computer's IP for any applications requiring the IP address.

6. Select TCP/IP. Press <Enter>.
7. The following messages appear and require the response indicated in the following bulleted list:
l Disable Network Interface: (Y/N)
Press <n>.
If the network is disabled, then all remote Intel AMT capabilities are disabled and TCP/IP settings are not necessary. This option is a toggle, and the
next time it is accessed you are prompted with the opposite setting.