User's Manual

Adding and Replacing Parts 167
If you ordered a Mobile Broadband card with your computer, the card is already
installed.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide .
1 Follow the procedures in "Before You Begin" on page 149.
2 Remove the hinge cover (see "Hinge Cover" on page 152).
3 Remove the keyboard (see "Keyboard" on page 153).
NOTICE: To prevent damage to the connector, do not use tools to spread the
securing clips.
4 If a Mobile Broadband card is not already installed, go to step 5. If you are
replacing a
Mobile Broadband card , remove the existing card:
a Disconnect the Mobile Broadband card from any attached cables.
1 Mobile Broadband card 2 antenna cables (2)
1 2