User guide
Back to Contents Page
Internal Card with Bluetooth®Wireless Technology
Dell™Latitude™D830ServiceManual
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
1. Follow the procedures in Before You Begin.
2. Remove the hinge cover (see Hinge Cover).
3. Remove the card from its compartment in the computer.
a. Slide the card to the right.
b. Lift the card out of the computer.
4. Disconnect the card from the card cable connector.
5. Connect the new card to the card cable connector.
6. Install the card by rotating and sliding it into the retention tab in the compartment.
7. Replace the hinge cover (see Hinge Cover).
Back to Contents Page
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back
panel of the computer.
1
metal tab
2
card
3
card cable connector
NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
1
card
2
card connector
3
card cable connector