Service Manual

1. Position the DC -in power assembly in the computer base, aligning the guides on the connector sides with the base.

2. Reconnect the DC -in power assembly to the connector on the underside of the system board.

3. Replace the system board (see Replacing the System Board Assembly).

4. Reconnect and reseat the coin-cell battery in the system board (see Replacing the Coin-Cell Battery).

5. Reconnect the speaker assembly cable.

6. Reconnect the smart card cable.

7. Replace the optical drive (see Replacing the Optical Drive).

8. Replace the system fan (see Replacing the System Fan).

9. Replace the palm rest (see Replacing the Palm Rest).

10. Replace the keyboard (see Replacing the Keyboard).

11. Replace the display assembly (see Replacing the Display Assembly).

12. Replace the hard drive (see Replacing the Hard Drive).

13. Follow the instructions in After Working on Your Computer.
Back to Contents Page
