Service Manual

Back to Contents Page
LatitudeON™Card
Dell™Latitude™E4300ServiceManual
Removing the Latitude On Card
Replacing the Latitude On Card

IfyouorderedaLatitudeOn™cardwithyourcomputer,thecardisalreadyinstalled.Itislocatedinthememorybay.
Removing the Latitude ON Card

1. Follow the instructions in What You Need to Know For Your Safety.

2. Close the display and turn the computer upside-down.

3. Loosen the captive screws on the memory cover.

4. Remove the memory cover.

5. Remove the M2 x 3-mm screw securing the Latitude ON card to the computer base.

6. Disconnect the two Latitude ON cables.

7. Lift the Latitude On card from the memory bay.
CAUTION: Before working inside the computer, read the safety information that shipped with the computer. For additional safety best practices
information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1
Latitude ON cables
2
Latitude ON card