Owners Manual

3. Perform the following steps:

a. Remove the screw that secures the camera and microphone module.

b. Disconnect the camera cable.

c. Lift and remove the camera and microphone module.

Installing the Camera

1. Place the camera and microphone module on its place.

2. Connect the camera cable.

3. Tighten the screw to secure the camera and microphone module.

4. Install:

a. display bezel

b. battery

5. Follow the procedures in After Working Inside Your Computer.

Removing the Display Panel

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. battery

b. display bezel