Owners Manual

Option Description

USB Wake Support Allows you to enable USB devices to wake the system from Standby.

NOTE: This feature is only functional when the AC power adapter is

connected. If the AC power adapter is removed during Standby, the

system setup will remove power from all of the USB ports to

conserve battery power.

• Enable USB Wake Support

• Default Setting: Enable USB Wake Support is not selected

Wireless Radio Control Allows you to enable or disable the feature that automatically switches

from wired or wireless networks without depending on the physical

connection.

• Control WLAN Radio

• Control WWAN Radio

• Default Setting: Control WLAN radio or Control WWAN radio is not

selected

Wake on LAN/WLAN Allows you to enable or disable the feature that powers on the computer

from the Off state when triggered by a LAN signal.

• Disabled: This option is enabled by default

• LAN Only

• WLAN Only

• LAN or WLAN

Block Sleep This option lets you block entering to sleep (S3 state) in Operating

System environment.

Block Sleep (S3 state) - This option is disabled by default. POST

Primary Battery

Configuration

Allows you to select the charging mode for the battery. The options are:

• Standard Charge

• Express Charge

• Predominately AC use

• Auto Charge: This option is enabled by default.

• Custom Charge

If Custom Charge is selected, you can also configure Custom Charge

Start and Custom Charge Stop.

NOTE: All charging modes may not be available for all the batteries.

Battery Slice Configuration Allows you to select the type of charge for the battery. The options are:

• Standard Charge

• Express Charge : This option is enabled by default.

NOTE: Express charge may not be available for all the batteries.