Owner's Manual

6. Remove the display panel from the display assembly.

Installing the Display Panel

1. Connect the LVDS cable and stick the LVDS cable connector tape.

2. Flip the display and place it in the display assembly.

3. Tighten the screws to secure the display panel to the display assembly.

4. Install:

a) display bezel

b) display assembly

c) battery

5. Follow the procedures in

After Working Inside Your Computer

Removing the Display Assembly

1. Follow the procedures in

Before Working On Your Computer

2. Remove:

a) battery

b) base cover

3. Remove the screws that secure the LVDS support bracket to the system board.