Owners Manual

OptionDescription
Default Setting: The options C states, C3, C6,
Enhanced C-states, and C7 options are
enabled.
Intel TurboBoostAllows you to enable or disable the Intel
TurboBoost mode of the processor.
Default Setting: Enable Intel TurboBoost
Hyper-Thread ControlAllows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
 7 .Power Management
OptionDescription
AC BehaviorAllows the computer to power on automatically, when AC adapter is plugged. The
option is disabled.
•Wake on AC
Auto On TimeAllows you to set the time at which the computer must turn on automatically. The
options are:
•Disabled (Default Setting(
•Every Day
•Weekdays
USB Wake SupportAllows you to enable the USB devices to wake the computer from standby mode.
The option is disabled
•Enable USB Wake Support
Wireless Radio ControlAllows you to control the WLAN and WWAN radio. The options are:
•Control WLAN radio
•Control WWAN radio
Default Setting: both the options are disabled.
Wake on LAN/WLANThis option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.
•Disabled - Does not allow the system to power on by special LAN signals when
it receives a wake-up signal from the LAN or wireless LAN. (Default Setting(
•LAN Only - Allows the system to be powered on by special LAN signals.
•WLAN Only
•LAN or WLAN
Block SleepAllows you to block the computer from entering into the sleep state. This option is
disabled by default.
•Block Sleep (S3(
67