Release Notes

6. Select the Send Wake-up packets check-box and select Purpose as Required.

7. Click Next.

8. Click New, and select the Assign Immediately after this event radio button.

9. Select the As soon as possible option, and change the Rerun behavior to Never rerun deployed program.

10. Click Next.

Known issues

Table 3. Known issues

Issue number Issue description Workaround

WS-1866 When the BIOS is flashed from SCCM through task sequence, an

error occurs on the server side and the client side. However the

BIOS is updated successfully.

There is no workaround.

WS-1914 Despite enabling the USB wake support function in BIOS, the

client does not wake from standby mode when the USB drive is

used.

There is no workaround.

Important Notes

• Thin clients restart twice after you push the add-on when write filter is enabled.

• Lock screen is disabled when the add-on is pushed using Wyse Device Manager.

• Lock screen is enabled when the add-on is pushed using Wyse Management Suite.

• Wyse Device Agent must be upgraded to the latest version before deploying the BIOS add-on.

• Connect the thin client to an AC adapter when performing a BIOS flash and for Wake On LAN functionality.

BIOS Add-on version 1.20.3 for Latitude E7270 Mobile Thin Client Release Notes