Owner's Manual

Option Description

• Enable Legacy Option ROMs — This

option is disabled by default.

Date/Time Allows you to set the date and time.

Table 3. System Configuration

Option Description

Integrated NIC Allows you to configure the integrated

network controller. The options are:

• Disabled

• Enabled

• Enabled w/PXE: This option is enabled

by default.

• Enable UEFI Network Stack: This

allows you to enable UEFI Networking

Protocols in pre-OS and early OS

networking environment.

Parallel Port Allows you to define and set how the parallel

port on the docking station operates. You can

set the parallel port to:

• Disabled

• AT

• PS2

• ECP (Latitude 7440)

Serial Port Identifies and defines the serial port settings.

You can set the serial port to:

• Disabled

• COM1

(Default Setting)

• COM2

• COM3

• COM4

NOTE

: The operating system may allocate

resources even if the setting is disabled.

SATA Operation Allows you to configure the internal SATA

hard-drive controller. The options are:

• Disabled

• AHCI

• RAID On (Default Setting)

NOTE

: SATA is configured to support

RAID mode.

Drives Allows you to configure the SATA drives on

board. The options are: