Deployment Guide

support.dell.com
Dell Latitude L400 System Information Guide 1-9
1. To install a device in the media bay, slide the device into the bay until you hear the
click that indicates that the device is fully seated.
2. Connect the larger of the media bay cable’s two connectors to the device through
the slot in the back of the bay.
Make sure that the securing clips are fully engaged and the connector is fully
seated.
3. Connect the other end of the cable to the media bay connector on the computer.
NOTES: For information on using the external media bay with different operating sys-
tems and programs, see your User’s Guide.
You can use the media bay cable in the same manner to connect a stand-alone device
to the computer.

 
#!
To turn on the computer, open the computer display and press the power button.
NOTE: Do not dock the computer until it has been turned on and shut down at least
once.
display
latch
media bay cable
external media bay
power button
"