Important information

Important Information
Re-Imaging Your Latitude ST
CAUTION: Always ensure to back-up your data before uninstalling the operating
system.
NOTE: The touch screen gestures will be available only after you re-install the required
drivers and utilities.
NOTE: Always connect an external USB optical drive, keyboard and mouse to the
computer via the docking station when uninstallating or re-installating the operating
system. In the absence of the docking station, use a USB hub to connect the
peripherals.
Latitude ST comes pre-installed with a Microsoft Windows 7 32 Bit SP1 operating
system and additional Dell recommended software stack, settings and drivers.
Re-imaging the computer, i.e. uninstalling and re-installing the operating system
and drivers is a multi-step process. This document provides important
information required after you re-image your computer, as Dell specific
components will not be available.
Drivers and utilities must be installed on the computer in a specific order to
ensure optimal performance. Failure to install drivers as described may result in
undesirable performance.
CAUTION: Re-image your computer from a clean operating system load and follow
the instructions in this document. Do not use an image built for other computer
systems.
Installation Sequence of Drivers and Utilities
NOTE: All drivers and utilities are available for download on support.dell.com.
On re-installing the operating system, install the drivers and utilities in the
following sequence:
2012 - 03
PejuTS.fm Page 1 Tuesday, March 6, 2012 2:23 PM