Service manual

Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manual
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following
procedure.
1. Remove the
keyboard.
2. Remove the
display assembly.
3. Remove the
display bezel.
4. Remove the two M2 x 3-mm screws on the left side of the display panel.
5. Remove the two M2 x 3-mm screws on the right side of the display panel.
6. Remove the M2.5 x 5-mm screw that secures the display-feed flex cable to the display
assembly.
7. Unsnap the flex-cable retention bracket from the top cover, and lift the bracket out of the
display assembly.
1 flex-cable retention
bracket
8. Lift the display panel from the top, and rotate the display panel out of the top cover.
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (6 of 10) [2/28/2004 8:22:14 AM]