Service manual

EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service Manual
1 EMI shield
2 M2.5 x 12-mm screws
(3)
Video Board
Removing the Video Board
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following
procedure.
1. Remove the
keyboard.
2. Remove the
EMI Shield.
3. Remove the screw that secures the video board to the system board:
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (2 of 12) [2/28/2004 8:22:16 AM]