Service manual

EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service Manual
5. Replace the keyboard.
Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following
procedure.
1. Remove the
keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the
display hinges pass through the back of the palm rest.
2. Remove the
display assembly.
3. Remove the
EMI Shield.
4. Remove the
video board.
5. Remove the two M2.5 x 5-mm screws from the top of the palm rest.
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (9 of 12) [2/28/2004 8:22:16 AM]