Service manual

Microprocessor Thermal-Cooling Assembly: Dell Latitude V710/V740 Service Manual
1 microprocessor thermal-
cooling assembly
2 captive screws (4)
3 fan power cable
5. Lift the microprocessor thermal-cooling assembly up toward the front of the
computer and out of the system board.
Replacing the Microprocessor Thermal-Cooling
Assembly
1. Place the back of the microprocessor thermal-cooling assembly under the palm
rest and lower the assembly onto the system board.
2. Tighten the four captive screws, labeled 1 through 4, in consecutive order.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/thermal.htm (2 of 3) [2/28/2004 8:22:16 AM]