Service manual

Microprocessor Module: Dell Latitude V710/V740 Service Manual
When the microprocessor module is correctly seated, all four corners are aligned
at the same height. If one or more corners of the module are higher than the
others, the module is not seated correctly.
NOTICE: Hold the microprocessor down while turning the cam screw to prevent
intermittent contact between the cam screw and microprocessor.
2. Tighten the ZIF socket by turning the cam screw clockwise to secure the
microprocessor module to the system board.
3. Update the BIOS using a flash BIOS update program floppy disk or CD. For
instructions on how to flash the BIOS, see "
Flashing the BIOS."
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/cpu.htm (4 of 4) [2/28/2004 8:22:17 AM]