Service manual

System Board: Dell Latitude V710/V740 Service Manual
g. Reinstall the hard drive cage, and reinstall the two M2.5 x 5-mm screws that secure
the hard drive cage to the system board.
h. Reinstall the floppy drive cage, and reinstall the two M2.5 x 5-mm screws that
secure the floppy drive cage to the system board.
2. Replace the
speakers.
3. Replace the
microprocessor and the microprocessor thermal-cooling assembly that you
removed from the old system board.
NOTICE: Route cables so that they will not be crimped or pinched when the complete
assembly is put back together.
4. Replace the
palm rest.
5. Replace the
video board and the EMI shield that you removed from the old system board.
6. Replace the
display assembly and the keyboard.
7. Replace the
floppy drive, optical drive, modem, memory module, and hard drive.
8. If applicable, replace the PC Card in the PC Card slot.
9. Replace the battery.
10. Connect the AC adapter to your computer and to an electrical outlet.
NOTICE: Before turning on the computer, replace all screws and ensure that no stray
screws remain inside the computer. Failure to do so may result in damage to the
computer.
11. Turn on the computer.
12. Insert the floppy disk or CD that accompanied the replacement system board into the
appropriate drive, and turn on the computer. Follow the instructions on the screen.
NOTE: After replacing the system board, enter the computer service tag sequence into
the BIOS of the replacement system board.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/sysboard.htm (7 of 8) [2/28/2004 8:22:19 AM]