Service manual

Base Plastics: Dell Latitude V710/V740 Service Manual
NOTICE: For V740 only, prior to replacing the base plastics, ensure that a
thermal pad is present on the Memory Controller Hub (MCH) heat-sink. If a
thermal pad is already present, you do not need to replace it.
Replacing the Thermal Pad (V740 Only)
Attach a new thermal pad inside the square etching on the MCH heat-sink, located on
the inside of the base plastics.
1 thermal pad
2 square etching on MCH
heat-sink
3 MCH
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/base.htm (2 of 3) [2/28/2004 8:22:20 AM]