Owners Manual

Using the On-Screen Display 73
4
Using the On-Screen Display
Your wide LCD monitor has an on-screen display (OSD) that allows you to select the proper input
source, make adjustments to the image and audio settings, select to view Picture-In-Picture,
Picture-Outside-Picture, and Picture-By-Picture. The OSD also allows you to chose how to view the
images when using the card reader and to make adjustments to the image if you are using the wide
LCD monitor as your computer monitor.
Using Your Remote Control With the OSD
NOTE: You can access and make selections to the OSD using the volume and channel buttons on the
side panel of the wide LCD monitor or the remote control. Except where noted, this section describes
how to use the OSD with the remote control.
1
To enter the OSD, press the Menu button.
Eight icons appear along the bottom of the screen.
2 Use the left and right buttons (volume buttons) to move between the icons.
The icon appears highlighted as you move through the menu.
3 To select an option, push the Enter button when the icon is highlighted.
4 In the option menu, use the up and down (channel) buttons to move through the various
settings.
NOTE: A red arrow appears next to the setting as you navigate through the options. A check mark
appears next to the option that is selected.
5
Use the up and down buttons (channel buttons) and the Enter button to adjust or select
settings.
NOTE: You can select Exit to return to the main menu or press Menu to exit the OSD.
MAIN MENU
EXIT
INPUT
SELECT
PICTURE
AUDIO
PIP/POP
PBP
SIZE
SLEEP
TIMER
SETUP
W2600A00.book 73 ページ ２００４年８月４日 水曜日 午後６時４８分