Owners Manual

78 Using the On-Screen Display
www.dell.com | support.dell.com
OSD Setup
OSD setup allows you to adjust the appearance of the OSD, set the channels when in wide LCD
m onitor mode, change the language of the OSD (see "Selecting Your OSD Language" on page 74),
and restore factory settings.
Use
OSD Hold Time to increase or decrease the amount
of time the OSD appears. The maximum amount of time
is 60 seconds.
In the
OSD Setup menu, you can select TV Button Lock
to lock the buttons on the side panel. When this option is
enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
To program a remote control key number for a specific
channel and select the number that displays on the
screen, select Channel Assignment from the Channel
Setup menu.
If you are using the DVI connector, you may need to verify the following settings:
Source — The default setting is Auto . The wide LCD m onitor automatically detects if a computer
(PC) or video device is being used. If the image does not display correctly, you can select the
source,
PC or Video , depending on the device you are using.
Color — The default color space is RGB. If the colors are not displaying correctly, you can change
the setting to
YUV.
Card Reader
A card reader allows you to view digital photos on your wide LCD m onitor .
FACTORY RESET
LANGUAGE
CHANNEL SETUP
OSD SETTINGS
BACK
DVI SETTINGS
SETUP
MAIN MENU
EXIT
INPUT
SELECT
IMAGE
MGMT
PICTURE
COLOR
SETTINGS
PIP/POP
PBP
SIZE
SETUP
W2600A00.book 78 ページ ２００４年８月４日 水曜日 午後６時４８分