Owners Manual

84 Troubleshooting Your Wide LCD Monitor
www.dell.com | support.dell.com
No sound 1 Ensure mute is not turned on. Pressing the Mute button
on the remote control turns the mute function on and
off.
2 If only certain wide LCD monitor channels do not have
sound, verify that the proper source is selected in the
Input Select menu.(For more information, see "Input
Select Menu" on page 74).
3 Verify that the audio cables are firmly connected to both
the audio input connectors on your wide LCD monitor
and audio output connectors on your devices. Ensure
that the cable colors match the connectors colors.
4 Also, ensure that the audio cables are connected to the
same row as the video cables. See "About Your Wide
LCD Monitor" on page 53 for the location of the
connectors.
5 Reconnect the device using the same type of connector.
For example, if you are using the composite connector
on the bottom, try connecting the device to the
composite connector on the side of the wide LCD
monitor . See "About Your Wide LCD Monitor" on
page 53 for the location of the connectors.
After you connect the device, change the input source in
the OSD. See "Input Select Menu" on page 74 for more
information.
6 Connect the device using a different connector. For
example, if you are experiencing the problem using a
composite connector, try using the component
connector.
NOTE: To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in
the OSD. See "Input Select Menu" on page 74 for more
information.
7 Test the device on a different wide LCD monitor .
NOTE: If you are using PIP/POP/PBP, ensure the proper
Audio Source is selected. Press Menu on your remote
control, and select PIP/POP/PBP.
Problem Possible Solution
W2600A00.book 84 ページ ２００４年８月４日 水曜日 午後６時４８分