Owners Manual

Troubleshooting Your Wide LCD Monitor 85
Double image or no image with DVD Turn off the progressive scan on the DVD player. Your
Dell™ wide LCD
m onitor offers built-in deinterlacer that
is equal to or better quality than the deinterlacer on your
DVD player. For more information about progressive scan
on your DVD player, see the documentation for your
DVD player
Picture is too dim or too bright
Update the color settings in the OSD. Press Menu on the
remote control and select
Picture .
The screen is not centered correctly 1 Update the size settings in the OSD. Press Menu on the
remote control and select
Size .
2 Reset the original factory defaults. Press Menu on the
remote control, select
Setup , and then select Factory
Reset
.
Screen has one or more lines 1 Check the aspect ratio settings in the OSD. Press the
Menu button on the remote control and select Size . For
more information on using the OSD, see "Using the On-
Screen Display" on page 73.
2 Ensure the proper source is selected in the Input Select
menu. See "Input Select Menu" on page 74 for more
information.
3 Try connecting a different device. Ensure that you
properly connect the cables and update the input source
in the OSD.
4 Update the size settings in the OSD. Press Menu on the
remote control and select
Size .
5 Reset the original factory defaults. Press Menu on the
remote control, select
Setup , and then select Factory
Reset
.
The side panel buttons do not work Check the OSD to see if the buttons have been locked.
Press Menu on your remote control, select Setup.
If you are unable to use the remote control, press the
volume up and the channel up buttons on the side of the
wide LCD
m onitor for 10 seconds to unlock the buttons.
The picture is too small
1 Adjust the size settings. Press Menu on the remote
control, and select
Size .
2 This may be a problem with your device. See the
documentation for the device.
Problem Possible Solution
W2600A00.book 85 ページ ２００４年８月４日 水曜日 午後６時４８分