Owners Manual

86 Troubleshooting Your Wide LCD Monitor
www.dell.com | support.dell.com
OSD Messages
While using your wide LCD m onitor , the following messages may appear.
Message Possible Solution
Auto Adjust No action required, the wide LCD
m onitor is
performing an auto adjustment.
Out of Range Check the optimal resolution settings.
You may need to download a new video driver. For
more information, go to support.dell.com.
No Video Input
1 Check all cables are properly connected.
2 Ensure the proper source is selected in the Input
Select
menu. See "Input Select Menu" on page 74
for more information.
TV Button Lock To unlock, press Menu on your remote control, select
Setup.
If you are unable to use the remote control, press the
volume up and the channel up buttons on the side of
the wide LCD monitor for 10 seconds to unlock the
buttons.
In Power Save Mode
Press any key on keyboard or move mouse
If you have a computer connected to the wide LCD
monitor and there is no signal detected, the wide
LCD monitor goes in to sleep mode. The power
light is amber when the wide LCD monitor in is
sleep mode.
Press any key on the keyboard or move the mouse to
wake the wide LCD monitor .
In Power Save Mode
Please Check Video Signal
If you are using a video device and it has been
inactive for 30 minutes the wide LCD monitor goes
in to power save mode. The power light is amber
when the wide LCD monitor is in power save mode.
Self Test Appears for computer source when there is nothing
plugged in. Select VGA or DVI from Input Select
menu and nothing is plugged in. Plug a computer in
to the VGA or DVI.
W2600A00.book 86 ページ ２００４年８月４日 水曜日 午後６時４８分