User's Manual

16 USC and USC - LCE
Canceling a Request to Enter System Services
If USC or USC - LCE causes the system to repeatedly reboot, you can cancel
a request to enter System Services.
CAUTION: This action cancels all tasks USC or USC - LCE is in the process of
executing. Dell strongly recommends that you cancel the request to enter System
Services only when absolutely necessary.
1 Press <Ctrl><e> when prompted during system start-up.
NOTE: You must press <Ctrl><e> within 5 seconds of when the message
displays.
The iDRAC6 Configuration Utility page displays.
2 Navigate to System Services .
3 Select Cancel System Services .
Save your changes and exit the
iDRAC6 Configuration Utility page.
The system reboots automatically.
Using USC Settings Wizard
USC Settings wizard enables you to specify the language, keyboard layout,
and network settings for USC or USC - LCE.
NOTE: USC settings apply only to USC or USC - LCE and do not apply to the system
or any other application running on the system.
1 Launch USC Settings Wizard:
a Boot your system and press the <F10> key within 10 seconds of the
Dell logo being displayed.
b Wait until USC Home screen is displayed then, click USC Settings in
the left pane.
2 Click Language and Keyboard in the right pane.
NOTE: Use the up-arrow and down-arrow keys to access all options on the
Language and Keyboard Type drop-down menus.
a
Select the language from the Language drop-down menu.
b Select the type of keyboard you are using from the Keyboard Type
drop-down menu.
c Click Finish .
LC1_2.book Page 16 Wednesday, November 18, 2009 9:42 AM