Users Guide

Getting Started With USC or USC-LCE 19
Viewing Readme
Click About View Readme to display the Readme file.
Disabling USC or USC-LCE
You can disable USC or USC-LCE to prevent your system from entering it on
start-up:
1 Press <Ctrl><e> within 5 seconds when prompted during system
start-up.
The iDRAC6 Configuration Utility page displays.
2 Navigate to System Services .
3 Select Disable System Services .
4 Save your changes and exit the iDRAC6 Configuration Utility page
menu. The system reboots automatically.
To enable USC or USC-LCE, repeat "step 1" and "step 2", and then select
Enable System Services.
Canceling Request to Enter System Services
If USC or USC-LCE causes the system to repeatedly reboot, you can cancel a
request to enter System Services.
CAUTION: This action cancels all tasks USC or USC-LCE is in the process of
executing. It is strongly recommended that you cancel the request to enter System
Services only when absolutely necessary.
1 Press <Ctrl><e> within 5 seconds when prompted during system
start-up.
The iDRAC6 Configuration Utility page displays.
2 Navigate to System Services .
3 Select Cancel System Services .
4 Save your changes and exit the iDRAC6 Configuration Utility page.
The
system reboots automatically.
Using USC Settings Wizard
USC Settings wizard enables you to specify the language, keyboard layout,
and network settings for USC or USC-LCE. USC settings apply only to USC
or USC-LCE and do not apply to the system or any other application running
on the system.
LC1_4.book Page 19 Friday, October 22, 2010 2:45 AM