Users Guide

USC and USC - LCE 25
Platform Rollback
USC-LCE enables you to roll back to a previously-installed version of BIOS or
firmware. It is recommended that you use this feature if you have a problem
with the current version and want to revert to the previously-installed version.
Only BIOS and firmware can be rolled back. USC-LCE, the hardware
diagnostics application, and operating system driver pack installation cannot
be rolled back to earlier versions.
This feature is available only if you have used the USC-LCE update feature to
update BIOS and firmware, or if you have updated the system BIOS or
firmware using a post-operating system Dell Update Package. If you have used
other update methods, this feature is not available.
See "Rolling Back to Previous BIOS and Firmware Versions" on page 42 for
more information.
Hardware Configuration
USC-LCE provides different wizards for configuring the hardware.
• Configuration Wizards guide you through setting up system devices.
The
Configuration Wizards include: Physical Security Configuration,
System Date/Time Configuration, iDRAC Configuration,
RAID Configuration, RAID Security Key Configuration, and vFlash
Media Configuration.
See the following sections for more information:
– "Physical Security Configuration" on page 43
– "System Date/Time Configuration" on page 44
– "iDRAC Configuration" on page 45
– "RAID Configuration" on page 54 - You can configure RAID through
the OS Deployment wizard. See "Configuring RAID Through the
Operating System Deployment Wizard" on page 61 for more
information.
– "Viewing Secure Capability Status and Virtual Disks of the Series 7
Controller" on page 62 and "Creating a Secure Virtual Disk on Series 7
Controller" on page 62 - To view and create secure virtual disks.
– "vFlash SD Card Configuration" on page 64.
LC1_4.book Page 25 Friday, October 22, 2010 2:45 AM