Users Guide

USC and USC - LCE 63
3 Select Secure Capable Controllers and click Next . Two options are
displayed:
• Configure Security Key Now
• Continue Virtual Disk Configuration
4 Select Configure Security Key Now and click Next . The security key
configuration screen is displayed.
5 The following options are displayed:
• Create Security Key
• Change Security Key
• Delete Security Key
6 Choose Create Security Key , if it is not configured and enter the details in
the relevant fields on this page.
7 Click Finish . The security key is created on the controller and the
Configuration Options page is displayed with two options - Express
Wizard
and Advanced wizard .
8 Select Advanced Wizard and click Next .
9 Select the required RAID level and click Next . The user interface displays
three filters. Here a new filter is displayed for encryption capability.
10 Select Self-encryption from the Encryption Capability drop-down. The
self-encryption disks (SEDs) are displayed.
11 Select the required physical disks and click Next .
12 In the Additional Settings page, check the Secure Virtual Disk box and
click
Next.
13 The Summary Page is displayed with details of the virtual disk attributes.
14 Click Finish .
LC1_4.book Page 63 Friday, October 22, 2010 2:45 AM