Users Guide

66 USC and USC - LCE

•The

BIOS

setup is very similar to the current setup utility (press the

<F2>

key during system startup); however, HII can access only a subset of the

utilities available in system startup.

•The

NIC

setup reflects various NIC attributes, some of which were visible in

the controller option read-only memory (ROM). However, many of these

attributes were previously only modifiable in Operating System utilities.

Depending on your system configuration, other device types may also appear

in Advanced Configuration, if they support the HII configuration standard.

HII Advanced Configuration wizard allows you to configure the following:

• System BIOS Settings

• Intel Pro/1000 PT Server Adapter

• Intel Pro/1000 PT Dual Port Server Adapter

• Intel Gigabit VT Quad Port Server Adapter

• Intel 10 Gigabit AF DA Dual Port Server Adapter

• Intel 10 Gigabit AT Port Server Adapter

• Intel 10 Gigabit XF SR Port Server Adapter

• Broadcom (Dual Port) 10G KX4

• Broadcom (Quad Port) GBE

• Intel (Quad Port) GBE

• Intel (Dual Port) 10G KX4

• Broadcom (Dual Port) 10G SFP+

• Broadcom (Quad Port) 10/100/1000 BASET

• Intel (Quad Port) 10/100/1000 BASET

• Intel (Dual Port) 10/100/1000 BASET

• Broadcom NetXtreme Gigabit Ethernet

• Broadcom 5709C NetXtreme II GigE

• Broadcom 57710 NetXtreme II 10GigE

• Intel Ethernet X520 10 GBE Dual Port KX4-KR Mezz

LC1_4.book Page 66 Friday, October 22, 2010 2:45 AM