Dell Lifecycle Controller USC Version 1.5.
What’s New Prerequisites for using USC For Blade systems, iDRAC version 3.4 For Rack and Tower systems, iDRAC version 1.9 Supported Dell Systems and Operating Systems For the list of Dell systems and operating systems that can be deployed on the target systems, see the "Lifecycle Controller – Supported Dell Systems and Operating Systems" section in the "Dell Systems Software Support Matrix" available at support.dell.com/manuals.
Issue 5 Description You may see a no optical device found error if you have a bad DVD/CD in the optical drive. This error does not mean that there are no optical devices on the system. If you remove the bad media, then this error is resolved. Issue 6 Description For RedHat Enterprise Linux version 4.8 operating system, you may need to install kernel source before installing the drivers present in OEMDRV. Issue 7 Description For RAID Configuration, PERC 6.1 Firmware or above is required.
Issue 13 Description Only Windows operating system can be deployed on systems with software RAID controller. Issue 14 Description While deploying Windows 2008 R2 SP1 or Windows SBS 2011 operating system using USC-LCE, the installation terminates with the error: There is no disk in the drive. Please insert a disk into drive \Device\Harddisk0\DR0 or DR1.
Information in this document is subject to change without notice. © 2012 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™, PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, KACE™, FlexAddress™ and Vostro™ are trademarks of Dell Inc.