User Manual
Table Of Contents
- Precision 5470 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
Steps
1. Align and place the M.2 2230 solid state drive on the M.2 2230 solid state drive bracket.
NOTE:
Install the M.2 2230 solid state drive to the SSD bracket so that the top side (with the sticker) of the M.2 2230
solid state drive is facing up.
2. Replace the (M2x2) screw that secures the M.2 2230 solid state drive to the M.2 2230 solid state drive bracket.
3. Carefully align and insert the M.2 2230 solid state drive bracket to its slot on the system board.
NOTE:
Slide the thermal plate into place over the SSD so that the tab on the plate is inserted into the securing peg on
the system board.
18 Removing and installing components