User Manual
Table Of Contents
- Precision 5470 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
About this task
The following images indicate the location of the left fan and provide a visual representation of the installation procedure.
Steps
1. Align the screw holes on left fan with the screw holes on the palm-rest and keyboard assembly.
2. Connect the left fan cable to the system board.
3. Replace the two (M2x4) screws that secure the left fan to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Right fan
Removing the right fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the right fan and provide a visual representation of the removal procedure.
Removing and installing components
27