User Manual
Table Of Contents
- Precision 5470 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
Steps
1. Align the screw holes on the hinges on the display assembly to the screw holes on the palm-rest and keyboard assembly.
2. Replace the six (M2.5x5) screws to secure the display assembly to the palm-rest and keyboard assembly.
3. Use a plastic scribe to tuck the display FPC into the gap between the system board and the bottom assembly until the white
line on the display connector lines up with the edge of the system board.
Removing and installing components
45