User's Manual

Table 30. Integrated Devices (continued)
Options Description
● Enable External USB Ports - Allows the user to enable or
disable the USB ports on the computer.
Storage
This section provides Storage details and settings.
Table 31. Storage
Options Description
SATA Operation
SATA Operation
This section allows the user to select the operating mode of
the integrated SATA hard drive controller. The following
options are available here:
● Disabled - SATA controllers are disabled.
● AHCI - SATA is configured in AHCI mode.
● RAID On - SATA is setup to support RAID (Intel Rapid
Storage Technology).
Storage Interface
Port Enablement
This section allows the user to enable or disable the onboard
drives on the computer. The following options are available
here:
● SATA-0
● M.2 PCIe SSD-0
SMART Reporting
Enable SMART Reporting
This section contains a toggle switch that allows the user to
enable or disable the S.M.A.R.T(Self-Monitoring, Analysis, and
Reporting Technology) option on the system.
Drive Information
This section provides information about the connected and
active drives on the computer.The following options are
available here:
● SATA-0
○ Type
○ Device
● M.2 PCIe SSD-0
○ Type
○ Device
Enable MediaCard
This section allows the user to switch all media cards On/Off,
or enable/disable the media card in read-state only. The
options seen are as below
● Secure Digital(SD) Card
● Secure Digital(SD) Card Read-Only Mode
30 System setup