User's Manual

Table 37. System Management (continued)

Options Description

Wake on AC

This field contains a toggle switch which allows the user to

enable or disable the feature where the system boots when

charger is detected.

Wake on LAN

This field allows the user to select if and how the system

should boot when connected to LAN. The options here are as

follows:

● Disabled - The system will not boot with any special LAN

signals.

● LAN only - Allows the system to be powered on by a

special LAN signal from a network computer.

● LAN with PXE Boot - Allows the system to wake-up from

S4 or S5 state and boot to PXE.

Auto On Time

This field allows the user to set defined days/time when the

sytem can automatically power on. The options here are as

follows:

● Disabled

● Everyday

● Weekdays

● Select Days

Keyboard

This section provides keyboard settings.

Table 38. Keyboard

Options Description

Numlock Enable

Enable Numlock

This field contains a toggle switch to enable or disable

Numlock function on boot.

Fn Lock Options

This field contains a toggle switch to change the mode of the

function keys. The options are as follows:

● Lock Mode Standard - Traditional F1-F12 functions

● Lock Mode Secondary - Enables secondary functions on

the Fn keys.

Keyboard Illumination

This field allows the user to set the keyboard illumination

settings. The options available are as follows:

● Disabled - The keyboard illumination will be off

● Dim - Enable the keyboard illumination feature at 50%

brightness level

● Bright - Enable the keyboard illumination feature at 100%

brightness level

36 System setup