Users Guide

28 Using Your Projector

screen replaces all the original screens with the Dell logo. You can recover the

default screen by selecting Dell Logo on the pop-up screen.

NOTE: To capture a full image, ensure the input signal that is connected to

projector is 1280x800 resolution.

ENU LOCK—Select On to enable Menu Lock and hide the OSD menu. Select Off

to disable the Menu Lock.

NOTE: You can also disable Menu Lock by pressing the Menu button on the

control pane or remote control for 15 seconds.

ENU TIMEOUT—Allows you to adjust the time delay of the OSD Timeout. The

default setting is 30 seconds.

ENU POSITION—Allows you to select the location of the OSD on the screen.

ENU TRANSPARENCY—Allows you to select the transparency level of the OSD

background.

ASSWORD—Allows you to password protect the projector. This security utility

enables you to impose a variety of access restrictions to protect your privacy and

stop others from tampering with your projector. This means that the projector

cannot be used if it is taken without authorization, and thus serves as a theft-

prevention feature.

Select On to enable password protection. A Please Key In the Password screen

appears requesting you to enter a password when the projector is powered on the

next time. Select Off to disable password protection.

NOTE: Password protection is disabled by default.

If you enable this feature, you will be asked to enter the projector's password

after you turn on the projector:

1 1st time password input request:

a Go to Others menu, press Enter and then select Password to Enable the

password setting