Owner's Manual

Fabric OS v6.3.1_dcb5 for DELL M8428-k Release Notes 1.0 Draft Page 14 of 23
Defect ID:
DEFECT000343097
Technical Severity:
Medium
Summary:
Allow Multiple Fabric Name Monitoring (MFNM) to be disabled on CEE switches when operating in
AG mode.
Symptom:
Currently, MFMN is hard-enabled on Brocade CEE AG, and cannot be disabled by the customer.
This results in warning messages being generated every few minutes if the Brocade 8000 is connected
to multiple fabrics.
Probability:
Medium
Feature:
Access Gateway Services
Function:
Daemon
Reported In Release:
FOS6.4.0
Defect ID:
DEFECT000356468
Technical Severity:
High
Summary:
Access Gateway does not clean up frame exchange properly if FLOGI/FDISC comes in from different
ports together with the same exchange ID (OX-ID).
Symptom:
3rd party applications report migration failures between servers.
Probability:
Low
Feature:
FOS Software
Function:
Access Gateway
Reported In Release:
FOS6.3.2
Service Request ID:
629273
Defect ID:
DEFECT000387572
Technical Severity:
Medium
Summary:
Persistence of "switchport" on port-channel is not working
Symptom:
After a code upgrade with a large configuration file, where port-channel and interface configurations
are back-to-back, information such as MTU, etc. is lost. Port-channel needs to be reconfigured.
Feature:
FOS
Function:
KERNEL
Reported In Release:
FOS6.3.1_dcb
Defect ID:
DEFECT000389661
Technical Severity:
Medium
Summary:
VeriSign Code Signing Certificate update for WebTools
Symptom:
WebTools will be considered as an UN-trusted application to the user. After the code fix, when
WebTools is launched for the first time with the updated certificate, a warning dialog will be
displayed. You can verify the certificate details (Issuer/Validity/Subject) by clicking “More
information” in the dialog. After selecting the checkbox “Always trust content… ”, and clicking the
Run button, the warning message will not display in further logins since it is now consider as a trusted
application.
Probability:
High
Feature:
WebMgmt
Function:
Login / Session Management
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000390285
Technical Severity:
Medium
Summary:
The ceeportloopbacktest fails when running in 1G mode.
Symptom:
The BR4870 systemverification fails in 1G mode.
Feature:
Diagnostics
Function:
Other
Reported In Release:
FOS6.3.1_dcb
Defect ID:
DEFECT000393888
Technical Severity:
High
Summary:
The NSMD daemon panics due to the display of invalid data on the interface poll.
Symptom:
The NSMD panics, followed by a switch reboot if more than one application is polling data at the
same time.
Feature:
FOS Software
Function:
FCoE
Reported In Release:
FOS6.3.1_dcb