Owner's Manual

Fabric OS v6.3.1_dcb5 for DELL M8428-k Release Notes 1.0 Draft Page 21 of 23
Defect ID:
DEFECT000317574
Technical Severity:
Medium
Summary:
Webtool, Port Administration-->CEE Interface, Ports in a LAG may be shown as LAG negotiating
failed although LAG was formed successfully.
Symptom:
Ports in a LAG may be shown as LAG negotiating failed on web gui although LAG was formed
successfully
Workaround:
CLI may be used.
Feature:
CEE-Protocol
Function:
NSM
Reported In Release:
FOS6.3.1_del
Probability:
Medium
Defect ID:
DEFECT000318097
Technical Severity:
Medium
Summary:
The Internal CEE port speed is set as Auto N10, but the webtools display the CEE port speed is set as
fixed 10G
Symptom:
Internal Port is displayed as 10G Fixed on the GUI
Workaround:
Use CLI "show interface in <port>"
Feature:
CEE-Protocol
Function:
NSM
Reported In Release:
FOS6.3.1_del
Probability:
High
Defect ID:
DEFECT000309787
Technical Severity:
Medium
Summary:
Under extremely rare conditions, launching Webtools may show "Exception in thread "AWT-
EventQueue-0" java.lang.NullPointerException" on Java Console
Symptom:
Unresponsive webtools for some period of time (few seconds).
Feature:
WebMgmt
Function:
Switch Explorer/Switch View
Reported In Release:
FOS6.3.1_del
Probability:
Medium
Defect ID:
DEFECT000311050
Technical Severity:
Medium
Summary:
Pref port failback happens as expected but with may print under certain conditions incorrect RAS log
messages on the console showing that the configured and preferred port for a F_Port are the same
Symptom:
Incorrect port number in the RASLOG message
Feature:
FCoE-AG
Function:
FCoE AG
Reported In Release:
FOS6.3.1_del
Probability:
High
Defect ID:
DEFECT000312411
Technical Severity:
Medium
Summary:
Command "show spanning -tree protocol" may showup as "(Peer_STP)P2P" instead of P2P for the
peer that has deleted spanning tree protocol after following specific set of steps.
Symptom:
Command "show spanning -tree protocol" may showup as "(Peer_STP)P2P" instead of P2P
Feature:
CEE-LAYER2
Function:
STP
Reported In Release:
FOS6.3.1_del
Probability:
High
Defect ID:
DEFECT000313668
Technical Severity:
Medium
Summary:
RFE: Disabling port mirroring on FC ports should prompt for user comfirmation similar to when
enabling.
Symptom:
Disabling port mirroring on FC ports does not prompt user for confirmation.
Feature:
FOS
Function:
Platform
Reported In Release:
FOS6.3.1_del
Probability:
Medium
Defect ID:
DEFECT000313901
Technical Severity:
Medium
Summary:
cmsh speed command should display error message when entered invalid speed 1, 10, 100 for internal
ports
Symptom:
No error message
Feature:
CEE-Protocol
Function:
NSM
Reported In Release:
FOS6.3.1_del
Probability:
Medium