User's Manual
70 Configuring Discovery and Inventory Settings
Creating a New Connection Profile
If you add Dell|EMC devices to the network, you cannot use the default
connection profile because this connection profile does not have the required
systems management protocols enabled. You must create a new connection
profile with EMC and SNMP enabled. (see Table 6-1 for connection profiles
required for various devices.)
1
See "Viewing the Default Connection Profile" on page 69.
2
On the
Manage Connection Profiles
page, click
Add Settings
.
3
On the
Define Group Settings
pane, turn on the
EMC
protocol and click
the down arrow to configure the EMC credentials.
4
Enter the Connection Profile name, for example,
EMC_SNMP
.
5
Select
emc-cred
from the drop down list, see "Managing Credentials" on
page 68.
Dell Management Console retrieves the
emc-cred
information and
populates all fields.
6
Select the
SNMP V1 V2
protocol and turn it on and click the down arrow
to configure the SNMP credentials and then click
OK
.
book.book Page 70 Monday, August 8, 2011 9:23 AM