User's Manual

Resetting The Virtual Appliance To Factory Settings

To reset the virtual appliance to factory settings:

1. In vSphere Client, select the Dell Management Plug-in virtual machine and click the Console tab.

2. Select Reset this Virtual Appliance to Factory Settings and press <ENTER>.

3. The following notice is displayed:

This operation is completely Irreversible if you continue you will

completely reset *this* appliance to its original settings. All changes you

have made to this appliance will be Lost. Are you sure you wish to Reset

this Appliance to Factory Settings?

4. Enter y to reset or n to cancel. The appliance is reset to the original factory settings.

NOTE: When the virtual appliance is reset to factory settings, any updates made to the Network Configuration

are preserved; these settings are not reset.

Refresh Console Tab View

To refresh the Console view, select Refresh and press <ENTER>.

Read Only User Role

There is an unprivileged user role called readonly with shell access for diagnostic purposes. The readonly user has

limited privileges to run the mount. The readonly user's password is set to the same as the admin.