Users Guide

Figure 5. Example VLAN network.

In this example network, the Dell Management Plug-in is on VLAN 5, while the vCenter and the VMkernal of the ESXi

hosts being deployed are on VLAN 10. Because the Dell Management Plug-in does not support multi-VLAN homing,

VLAN 5 must route to VLAN 10 for all systems to communicate to each other correctly. If routing is not enabled between

these VLANs, then the deployment fails.

Viewing Or Editing Hypervisor Profiles

To view or edit hypervisor profiles:

1. In the Dell Management Center, select Deployment → Deployment Template → Hypervisor Profiles window.

2. Select a profile and click View/Edit.

3. In the Hypervisor Profiles: Profile Name window, select the profile section to display or change, and make any

necessary changes.

4. Click Save to apply changes, or click Cancel to cancel changes.

Duplicating a Hypervisor Profiles

To duplicate a hypervisor profile:

1. In the Dell Management Center, select Deployment → Deployment Template → Hypervisor Profiles.

2. On the Hypervisor Profiles page, select a profile and click Duplicate.

3. In the Duplicate dialog box, enter a unique hypervisor profile name.

4. Click Apply to create a copy of the profile with the new name, or click Cancel to cancel.