Dell PowerVault MD Storage Array Management Pack Suite Version 5.
This readme provides information on the Dell MD Storage Array Management Pack Suite version 5.0, which can be imported into Microsoft System Center 2012 SP1 Operations Manager, Microsoft System Center 2012 Operations Manager, Microsoft System Center Operations Manager (SCOM) 2007 R2, and Microsoft System Center Essentials (SCE) 2010.
Installation Details For Dell Discovery Utility No specific installation needed. This utility is installed by running the Dell MD Storage Array Management Pack Suite 5.0 installer.For information on launching the Dell Discovery utility version 5.0, refer the "Dell MD Storage Array Management Pack Suite Version 5.0 for Microsoft System Center Operations Manager and System Center Essentials” Installation Guide. NOTE: The Installation Guide (DellMPv50_MDStorageArray_IG.
Requirements Controller Firmware: The recommended PowerVault Controller Firmware (CFW) version • • 07.35 for MD3000/MD3000i 07.84 for MD3200/MD3200i/MD3220/MD3220i/MD3260/MD3260i and MD3600i/MD3620i/MD3600f/MD3620f/MD3660i/MD3660f The supported Controller Firmware (CFW) versions are: • • • • • 07.35 for MD3000/MD3000i 07.80, 07.84 for MD3200/MD3200i/MD3220/MD3220i 07.84 for MD3260/MD3260i 07.80, 07.84 for MD3200/MD3200i/MD3220/MD3220i and MD3600i/MD3620i/MD3600f/MD3620f 07.
Upgrading From Previous Versions You can upgrade Dell MD Storage Array Management Pack Suite 4.1 to Dell MDStorage Array Management Pack Suite 5.0. For information on upgrading the Dell MD Storage Array Management Pack Suite version 5.0 for your version of OpsMgr, refer the "Dell MD Storage Array Management Pack Suite Version 5.0 for Microsoft System Center Operations Manager and System Center Essentials” Installation Guide. NOTE: The Installation Guide (DellMPv50_MDStorageArray_IG.
• Microsoft System Center Essentials (SCE) 2010 Issue 3: When EMM firmware does not match the MD Storage Array, OpsMgr may show the EMM as healthy - (473374). Workaround: You need to check for EMM Firmware mismatch alerts in MD Storage Array Alerts view and take appropriate action as specified in the Alert's Knowledge Article.
• Microsoft System Center Essentials (SCE) 2010 Issue 7: The Display Name attribute for Dell PowerVault MD Array is not displayed in the tooltip for MD storage Array objects in OpsMgr - (340250) Description: The tooltip displayed on selecting the MD storage Array device objects in the Diagram view of the OpsMgr and its Web console does not display any information related to the Display Name attribute of the device, though other attribute information get displayed. Workaround: No known workaround.
Issue 2: You cannot launch the Dell Discovery utility from a network share - (354368). Workaround: You must modify the .Net security policy in order to run the application from anetwork share. For more information, see http://support.microsoft.com/kb/897296.
Global Support For information on technical support, visit www.dell.com/contactus. For information on documentation support, visit dell.com/manuals/support. Information in this document is subject to change without notice. © 2013 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
