Microsoft System Center Operations Manager 용 Dell PowerVault MD Storage Array Management Pack Suite 버전 6.
참고, 주의 및 경고 노트: 참고"는 제품을 보다 효율적으로 사용하는 데 도움이 되는 중요 정보를 제공합니다. 주의: 주의사항은 하드웨어의 손상 또는 데이터 유실 위험을 설명하며, 이러한 문제를 방지할 수 있는 방법을 알려줍니다. 경고: 경고는 재산 손실, 신체적 상해 또는 사망 위험이 있음을 알려줍니다. © 2014 ~ 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC 및 기타 상표는 Dell Inc. 또는 그 자회사의 상표입니다. 다른 상표는 해당 소유자 의 상표일 수 있습니다.
목차 장 1: 개요........................................................................................................................................ 4 본 문서에 사용된 용어.........................................................................................................................................................4 전제조건.................................................................................................................................................................................
1 개요 이 안내서는 Microsoft System Center Operations Manager용 Dell Modular Disk (MD) Storage Array Management Pack Suite 버전 6.1의 설치, 구성 및 사용에 대한 정보를 제공합니다. Dell MD Storage Array Management Pack Suite 버전 6.1을 Microsoft System Center 2016 Operations Manager, Microsoft System Center 2012 R2 Operations Manager, Microsoft System Center 2012 SP1 Operations Manager, Microsoft System Center 2012 Operations Manager 및 Microsoft System Center Operations Manager 2007 R2 환경과 통합하면 Dell 장치를 관리하고 모니터링하며 가용성을 보 장할 수 있습니다.
Dell PowerVault MD Storage Array Management Pack Suite 내용물 Dell PowerVault MD Storage Array Management Pack Suite 버전 6.1은 다음 항목과 함께 자동 압축 해제 실행 파일인 Dell_MD_StorageArray_Management_Pack_Suite_v6.1_Axx.exe에 패키지로 제공됩니다. ● Dell_MD_StorageArray_Management_Pack_Suite_x86_x64.exe — Dell PowerVault MD Storage Array Management Pack Suite 설치용 설치 프로그램입니다. ● DellMPv61_MDStorageArray_IG.pdf — Dell PowerVault MD Storage Array Management Pack Suite의 안내서입니다. ● DellMPv61_MDStorageArrayMP_Readme.
2 Dell MD Storage Array Management Pack Suite 설치, 제거 및 업그레이드 주제: • • • • • • • • 설치 정보 Dell MD Storage Array Management Pack Suite 설치 사전 가져오기 작업 관리 팩 가져오기 설치 프로그램의 복구 옵션 사용 이전 관리 팩에서 업그레이드 트랩을 모니터링하도록 OpsMgr 구성 Dell MD Storage Array Management Pack Suite 제거 설치 정보 ● Dell PowerVault MD Storage Array Management Pack Suite를 설치하고 관리 팩을 가져오고 Dell PowerVault MD Storage Arrays를 검색하는 과정은 별개의 절차입니다. ● Dell PowerVault MD Storage Management Pack Suite는 디버그 로그 파일을 삭제하지 않습니다.
사전 가져오기 작업 Dell MD Storage Array Management Pack Suite을 OpsMgr으로 가져오기 전에 다음을 수행하십시오. 1. Dell MD Storage Array Management Pack Suite 설치 2. Dell PowerVault MD Storage Array 장치를 관리하려는 관리 서버에서 다음 중 하나의 작업을 수행합니다. ● Dell MD Storage Array Management Pack Suite을 설치한 위치의 라이브러리 폴더에서 Dell 검색 유틸리티 (DellDiscoveryUtility.exe)를 실행합니다. 네트워크에서 Dell PowerVault MD 스토리지 어레이를 검색하고 검색 프로세스를 완료하려면 마법사에서 언급한 입력 단계를 따릅니다. 네트워크에 있는 스토리지 어레이의 IP 주소로 Dell_MDStorageArray_ip.cfg 파일을 수동 업데이트합니다.
이전 관리 팩에서 업그레이드 Dell MD Storage Array Management Pack Suite 버전 6.0에서 업그레이 드 버전 6.1 관리 팩을 가져와 Dell MD Storage Array Management Pack Suite 6.0에서 업그레이드할 수 있습니다. Dell MD Storage Array Management Pack Suite 6.1을 가져오려면 관리 팩 가져오기에 제공된 단계를 따르십시오. 노트: 버전 6.1로 업그레이드한 후에 경고 제목과 설명이 업데이트되므로 소수의 기존 경고가 복제됩니다. 기존 경고가 복제되지 않도록 하려면 업그레이드하기 전에 기존 경고를 닫으십시오. 노트: Dell MD Storage Array Management Pack Suite 버전 6.0에서 버전 6.1로 업그레이드하기 전에, Dell MD Storage Array Management Pack Suite 버전 6.1이 설치된 위치에 기존 IP 목록 파일을 복사하십시오. 노트: 버전 6.
트랩 수신을 위한 Run As 계정 생성 트랩 수신을 위한 Run As 계정을 생성하기 전에, Dell Storage MDStorage Array SNMP(Dell.Storage.MDStorageArray.SNMP.mp) 관리 팩을 가져옵니다. 1. OpsMgr을 실행하고 Administration(관리)을 클릭합니다. 2. Administration(관리) 창에서 Run As Configuration(Run As 구성) > Accounts(계정)로 이동합니다. 3. Accounts(계정)를 마우스 오른쪽 단추로 클릭하고 Create Run As Account(Run As 계정 생성)를 클릭합니다. Introduction(소개) 화면이 표시됩니다. 노트: 네트워크 모니터링을 위해 Run As 계정 생성에 대한 자세한 내용은 technet.microsoft.com/en-us/library/ hh212920.aspx의 Microsoft TechNet 사이트를 참조하십시오. 4. Next(다음)를 클릭합니다.
노트: Dell PowerVault MD Storage Array Management Pack을 삭제하는 동안 Dell Base Hardware Library를 삭제하기 전에 관리 팩을 삭제해야 합니다. 관리 팩은 Dell Base Hardware Library에 의존하기 때문입니다. 관리 팩을 삭제하려면 다음 단계를 따르십시오. 1. OpsMgr 콘솔을 실행합니다. 2. Administration(관리)을 클릭합니다. 3. Management Packs(관리 팩) 창에서 Dell MD Storage Array Management Pack(Scalable), Dell Storage MDStorage Array SNMP 및 Dell MD Storage Array Detailed Monitoring Utility(상세 버전의 관리 팩을 가져온 경우)를 선택합니다. 4. 선택한 관리 팩을 마우스 오른쪽 단추로 클릭하고 Delete(삭제)를 클릭합니다.
3 보안 고려 사항 OpsMgr는 여러 작업에 대한 액세스 권한을 내부적으로 처리합니다. 이 권한은 OpsMgr 콘솔에서 Administration(관리) > Security(보안) 기능 아래에 있는 User Roles(사용자 역할) 옵션을 사용하여 설정할 수 있습니다. OpsMgr 콘솔에서 수행할 수 있는 작업은 역할의 프로필에 의해 결정됩니다. 보안 고려 사항에 대한 자세한 내용은 technet.microsoft.
4 문제 해결 문제와 해결 방법 다음 표에는 알려진 문제, 원인 및 문제의 해결 방법이 나와 있습니다. 표 1. 문제와 해결 방법 문제 원인 해결 방법 경고는 Dell PowerVault MD Storage Array Management Pack Suite가 찾을 수 없거나 시스템에서 손상되었음을 나타내기 위해 관리 서버의 All Alerts View(모든 경고 보 기)에 표시됩니다. Dell PowerVault MD Storage Array Management Pack Suite에서 설치한 파일 이 손상되었거나 관리 서버에서 삭제되었 습니다. Dell PowerVault MD Storage Array Management Pack Suite 버전 6.1 설치 프로 그램을 사용하여 Dell PowerVault MD Storage Array Management Pack Suite 설 치를 복구합니다. 자세한 내용은 설치 프로 그램의 복구 옵션 사용을 참조하십시오.
설치 프로그램의 제거 옵션 사용 설치 프로그램을 사용하여 Dell MD Storage Array Management Pack Suite을 제거하려면 다음 단계를 따르십시오. 1. Dell_MD_StorageArray_Management_Pack_Suite_v6.1_Axx.exe 파일의 내용을 추출한 폴더에서 Dell_MD_StorageArray_Management_Pack_Suite_x86_x64.exe를 실행합니다. Welcome(시작) 화면이 표시됩니다. 2. Next(다음)를 클릭합니다. 3. Remove(제거) 옵션을 선택하고 Next(다음)를 클릭합니다. Remove the Program(프로그램 제거) 화면이 표시됩니다. 4. Remove the Program(프로그램 제거) 화면에서 Remove(제거)를 클릭합니다. 설치 프로그램의 복구 옵션 사용 설치 프로그램의 Repair(복구) 옵션을 사용하면 설치 오류를 복구할 수 있습니다.
5 Dell EMC 지원 사이트의 지원 콘텐츠 액세스 Dell EMC 지원 사이트에 방문하거나 직접 링크 또는 검색 엔진을 사용하여 일련의 시스템 관리 툴에 관련된 지원 콘텐츠에 액세스합 니다. ● 직접 링크: ○ Dell EMC Enterprise Systems Management 및 Dell EMC Remote Enterprise Systems Management— https://www.dell.com/ esmmanuals ○ Dell EMC Virtualization Solutions— https://www.dell.com/virtualizationsolutions ○ Dell EMC OpenManage—https://www.dell.com/openmanagemanuals ○ iDRAC— https://www.dell.com/idracmanuals ○ Dell EMC OpenManage Connections Enterprise Systems Management— https://www.dell.