User`s guide

Installation

3 Place the rPDU in a protected area that has adequate airflow and is free of humidity, flammable gas, and

corrosion.

4 Discard or recycle the packaging in a responsible manner, or store it for future use.

Inspecting the Equipment

If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the

carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a

claim for concealed damage.

To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of the

equipment; 2) Send a copy of the damage claim within 15 days to your service representative.

Checking the Accessory Bag

The rPDU accessory bag includes the following:

S (2) deep mounting pegs and (2) 8-32 5/8” mounting screws (for 90° installation)

S Grounding kit with:

- (1) silver 10-32

0.5” pan-head screw

- (1) black, M5

12 pan-head screw

- (1) ground wire

- (2) star washers

S Safety, Environmental, and Regulatory Information (SERI) document

S Quick Start Installation Sheet

S (1) RJ-45 Cable (RJ-45-to-DB9-female, 2.0m length, serial cable)

If you ordered the optional strain relief brackets (shipped separately), check that the following associated

hardware is included with the option.

For the side-mounted strain relief bracket:

S (3) strain relief brackets

S (8) M3 6 flat-head cross screws

For the front-mounted strain relief bracket:

S (3) strain relief brackets

S (4) 6-32 1/4” flat-head cross screws