User`s guide

70
|
Web Interface Operation
5 From the Access Type list, select the user privilege. Selections are Device Access or Read Only.
6 Click Save to apply the new user name, password, and access privilege.
7 Repeat these steps to authorize additional users. When all intended user access is configured, this
procedure is completed.
Setting the Date and Time
NOTE: The default is to synchronize the date and time from the computer clock.
To set the date and time:
1 From the System menu, click Date & Time. The Date and Time page displays.
NOTE:
The Current Date and Time table displays the present system date and time.
2 In the Configure Date and Time table, choose one of the following methods:
To synchronize with computer time, go to Step 3.
To synchronize with a Network Time Protocol (NTP) server, go to Step 5.
To set the time and date manually, go to Step 9.
3 Select the Synchronize with computer time radio button. The current computer date and time displays.
4 Go to Step 10.
5 Select the Synchronize with NTP server radio button.
6 Type the NTP server address or DNS host address in the appropriate field, then select the time zone from
the list.
7 Optional. Enable Daylight Savings Time by selecting the check box.
8 Go to Step 10.
9 Select the Set manually radio button. Type the time and date in the appropriate field.
10 Optional. Select a new format in the Date Display Format list.
11 Click Save.
12 This procedure is completed.
Configuring Email Notification
NOTE: Only the administrator can configure these settings.
To configure automatic Email notification:
1 From the System menu, click Email Notification. The Email Notification page displays.
2 Locate the Email Configuration table.
3 Complete entries for attributes (see Table 18).
4 Click Save.
5 This procedure is completed.