User`s guide

Web Interface Operation

Configuring Default CSV File Opening Settings

To configure default CSV file opening settings:

1 After the configuration file is downloaded a destination on your desktop, correct the default file opening

settings as follows:

S Click the My Computer icon and select Folder Options from the menu.

S Select the File Type tab and select CSV as the file type.

S Click the Advanced button, then select Open.

S Select the Confirm open after download check box.

NOTE:

Do not select the Browse in the same window option.

S Repeat the steps to correct the default file opening settings for the file type XLS.

NOTE:

After these settings are corrected, other configuration files will download properly.

2 This procedure is completed.

Configuring Network Access and Control

This section explains:

S Setting general IPv4 and IPv6 configuration options

S Enabling TCP/IP network controls

S Setting SNMP/HTTP access control

S Configuring SNMP protocol settings and trap receivers

Setting General TCP/IPv4 Configuration Options

To configure TCP/IPv4:

1 From the Network menu, click Configuration. The Network Configuration page displays.

2 Locate the General TCP/IPv4 Configuration table and enter configuration values for IPv4 (see Table 21).

3 Click Save.

4 This procedure is completed.