User`s guide

Introduction

Providing outstanding performance and reliability, the rPDU benefits include the following:

S The rPDU can be installed as either 42U or 48U applications (depending on the model).

S The rPDU can be mounted using either factory-installed standard mounting pegs on the back of the rPDU,

or turned 90° by using user-installed deep mounting pegs on the side of the rPDU.

S Color-coded silk screening for outlet receptacles and circuit breakers clearly associate circuit breakers with

the receptacles they protect.

S The rPDU models provide several configurations of IEC 320 C-13 and IEC 320 C-19 outlet receptacles on

the front panel.

S The attached power cords for all models are 3m (10 ft) with IEC60309 input connector plugs.

S All receptacles, circuit breakers, ports, ground bonding point, and user interfaces are located on the front

panel of the rPDU for easy access.

S The rPDUs models are configured with either Delta or Wye topology.

S The rPDU provides an environmental monitoring sensor port, a dry contact sensor port, a 10/100 Base-T

Ethernet port, and a serial communication port.

S The LCD panel provides pushbutton controls for accessing performance monitoring data, event

notifications, and user-configured provisioning options.

S The rPDU provides an internal Dellt Network Management Card (NMC) for network communications.

The following options are available for the rPDU:

S Side- and front-mounted strain relief brackets for secure power cord retention (bracket type depends on

model)

S Dry contact sensor

S Temperature sensor

S Temperature and humidity sensor

The rPDU provides the following meters and measurements for reporting operational status:

S Input Voltage (V)

S Input Frequency in Hertz (Hz)

S Input Current in Amperes (A)

S Input Watts (W)

S Input Volt-amperes (VA)

S Instantaneous Headroom Watts

S Peak Headroom Watts (with time stamp)

S Peak Consumption Watts (with time stamp)

S Cumulative Kilowatt per Hour (with time stamp)

S Temperature (if an optional temperature sensor is installed)

S Humidity (if an optional humidity sensor is installed)

S Real-Time Clock