Administrator Guide
Table Of Contents
- Dell EMC Storage 시스템 PowerStore 및 Unity XT 메트로 노드 기능에 대한 관리자 가이드
- CLI 작업 공간 및 사용자 계정
- 메타 볼륨
- 시스템 관리
- 메트로 노드의 씬 지원
- 스토리지 프로비저닝
- 볼륨 확장
- 데이터 마이그레이션
- WAN 네트워크 구성
- 정합성 보장 그룹
- 성능 및 모니터링
- Active-Passive 스토리지 어레이를 사용하는 메트로 노드
- 색인
● --force 옵션과 함께 device attach-mirror 명령을 사용합니다. 새 가상 볼륨은 씬 활성화되 아니고 씬 지원도 아닙니다.
VPlexcli:/clusters/cluster-1/devices> device attach-mirror --device myDevice --mirror
myMirror
VPlexcli:/clusters/cluster-1/devices>
미러링된 씬 설정에서 모든 레그는 동일한 스토리지 어레이 제품군에서 가져와야 합니다. 다른 스토리지 어레이 제품군에 속하는 어
레이에서 씬 레그를 생성하려 시도하면 레그의 씬 특성이 손실되고 씬 스토리지 관리 기능을 지원하지 않습니다. 다음은 그러한 시나
리오의 예입니다.
VPlexcli:/> device attach-mirror --device xio_device --mirror vnx_device
Thin-capability is only supported with homogeneous storage-array types. The top-level device
'xio_device' is supported by XtremIO but the mirror 'vnx_device' is supported by CLARiiON.
Since XtremIO and CLARiiON are not homogeneous, the top-level device will lose thin-capability
after the new mirror is attached. Do you wish to proceed? (Yes/No) No
device attach-mirror: Evaluation of <<device attach-mirror --device xio_device --mirror
vnx_device>>
failed.
cause: Unable to attach mirror 'vnx_device' to device 'xio_device'.
cause: Operation was halted by the user
VPlexcli:/>
씬 마이그레이션 정보
메트로 노드는 씬 볼륨을 다른 스토리지 어레이로 마이그레이션하는 작업을 지원합니다.
마이그레이션 후 씬 볼륨이 씬 스토리지 관리 기능을 지원하려면 소스 및 타겟 볼륨이 모두 동일한 스토리지 어레이 제품군에서 생성
되어야 합니다. 다른 스토리지 어레이 제품군에 속하는 어레이에서 생성된 경우 thin-enabled 속성은 true로 유지되고 thin-
capable 속성은 false로 설정되며 UNMAP 명령은 거부됩니다.
씬 가능 스토리지 마이그레이션에서는 씬 스토리지 마이그레이션에 대한 추가 정보를 제공합니다.
28 메트로 노드의 씬 지원